32.8ft LED Strip Lights, 120 Volt, 80W 600 SMD 5050 LEDs, Waterproof, Flexible, Warm White

32.8ft LED Strip Lights, 120 Volt, 80W 600 SMD 5050 LEDs, Waterproof, Flexible, Warm White 2 4.5 5 1
$26.00
SKU
4100074-WW-US
33ft
49ft
65ft
82ft
Only 45 left in stock

Dimension: 1000mm (length per roll) *14mm (width)
Working Voltage:  100-120V AC mains operated
Waterproof. IP65 rating. Can be used in outdoor.
Colour Temperature: Warm White(3000K-3500K)
Easy Installation. Plug and play without wiring.
Size of LEDs: 5050 SMD

Flexible.
Slim, compact and flexible PVC strip. Applicable for bendable or angled patterns, or in continuous rows.
Cuttable and linkable.
It can be cut in every meter along the cutting marks, without damaging the rest strips.
Components Saving.
Can be directly connected into main supply, no power adapter, transformer or driver is required.
High Voltage.
Low voltage drop. More little light attenuation, well-distribute lighting in the whole 50 m strips.
Reduce re-lamp frequency.
Lifespan is over 50,000 hrs. Save effort and labour costs on changing lights frequently.
Widely applicable.
Not only be cut in sections, but also can run in with only one power plug.
Eco-Friendly.
No lead or mercury.It is convenient and cost-saving for large outdoor projects.


Length:10m

Wattage: 80W

Input Voltage: 100-120VAC

Input Current: 720mA

Power Factor: Over0.5

LED Model: 5050

Color: Warm White 3000K

Not dimmable

IP65 Waterproof

8mm PCB Board

Take the product out of the box, use the stick object to pass through the center of the light strip reel, take the stick object as the revolving shaft, pull the light strip port by hand, and slowly drive the light strip to expand from the reel at a uniform speed.

Use matching fixing card to install light strip. It is recommended to use at least one fixed card per meter during the installation of the light strip. Fixed card needs to reserve screw hole position, which can be used in conjunction with fixed card. (Note: Fixed cards are not allowed to be installed above the beads!)

After fixing the light strip, connect to the power, and the input voltage should meet the requirements of product design.

When installing the high-voltagelight strip, the side bending should not exceed 30 degrees. Otherwise, multiple bending will easily lead to the internal circuit of the power supply.

Avoid dragging the LED light strip on the ground to avoid scratching or damage the protective layer. If the protective layer of thelight strip has been damaged, please stop installing light strip immediately.

When this product is packaged in whole roll, do not light it for a long time, so as to avoid the heat of thelight strip and cause safety accidents.

Before using it, please purchase the rated voltage of this product.

SKU 4100074-WW-US Power Consumption (W) 80
Lamp current (mA) 720 Light Color Warm White
Color Temperature (K) 3000K Dimmable Non-dimmable
Input Voltage (v) 120V AC Frequency (hz) 60
Power Factor Over0.5 Lifespan (h) 50000
Length (in) 393.70 Width (in) 0.55
Net Weight (lb) 3.54 Material PVC
Power Source AC Waterproof Yes
Protection Rating IP65 Safety Rating ETL
Package Quantity Pack of 1 Unit Warranty 1 Year
Weight 3.6080
32.8ft LED Strip Lights, 120 Volt, 80W 600 SMD 5 ...
$26.00
FREE shipping on orders over $39 within U.S