12V RGB LED Strip Lights Kit, 150 Units 5050 LEDs, Waterproof, with Remote Controller & Power Adaptor, Pack of 5M, Flexible LED Tape Light Kit
All in one kit. RGB LED strips, remote controller, power adaptor and connectors are included. No more accessories are required
The input voltage is 110v
The ouput voltage is 12v
All in one kit. RGB LED strips, remote controller, power adaptor and connectors are included. No more accessories are required.
Easy Installation. Plug and play without wiring requirements
16 colour choice with 5 light patterns: Static/Flash/Strobe/Fade-change/RGB Smooth-change. Speeds Control in Flash / Strobe / Fade-change / RGB Smooth-change
Waterproof. IP65. Please note: only LED strips are waterproof. Remote controller, power adaptor and connectors are non-waterproof.
Cuttable and linkable. Easy to cut and use with Lighting EVER accessory (include)
Flexible. Easy to use in most of lighting applications
Eco-Friendly. No lead or mercury
Solid State. Shockproof and vibration proof
No Hazardous Emissions. No UV or IR Radiation
The input voltage of the power adaptor is 100-240V AC
The working voltage of the strip light is 12V DC
Dimensions for accessaries: US plug power adapter cable: 120cm, DC cord: 15cm.
Application: Widely used for home, automobile, bicycle, hotels, clubs, shopping mails and architectural decoration emergency & security and ad sign lighting, decorative lights for holiday, event, show exhibition.
1 x 5M 5050 Non-Waterproof RGB LED Striplight (To get more striplight, please search 4100059-RGB-F)
1 x 24W Power Adaptor with 1.2M Cord (To get more power adaptor, please search 5000028, 5000030 or 5000067)
1 x 44-Key Remote and Controller Box (To get more controller, please search 5000049)
2 x Solderless Strip-to-Strip Connectors (10mm width, 4-pin)
1 x 150mm DC Cable/cord (4-pin, connecting strip to controller box)
The 44 Keys Remote Control Button Layout
8 Light Pattern:Quick / Slow / Auto / Flash / 7 color fade change / 3 color fade change / 7 color jumpy change / 3 color jumpy change R / G / B increase and decrease control. All the LEDs spread very smoothly from one Color to the next.
|Brightness + (7 steps)||Brightness - (7 steps)||Pause/Run||On/Off|
|Static Red||Static Green||Static Blue||Static White|
|Static Orange||Static Pea Green||Static Dark Blue||Static Pink|
|Static Dark Yellow||Static Cyan||Static Royal Blue||Static Light Pink|
|Static Yellow||Static Light Blue||Static Light Brown||Static Green White|
|Static Light Yellow||Static Sky Blue||Static Violet||Static Blue White|
|Increse Red||Increase Green||Increase Blue||Speed Up|
|Decrease Red||Decrease Green||Decrease Blue||Speed Down|
|DIY Colour 1||DIY Colour 2||DIY Colour 3||Automatic Change|
|DIY Colour 4||DIY Colour 5||DIY Colour 6||Flash On/Off|
|Jump (3 Colours)||Jump (7 Colours)||Fade (3 Colours)||Fade (7 Colours)|
Connecting power to RGB light strip with remote controller
24W Power adapter (included) + remote controller (included) + 5m rgb striplight (included)
Connecting two or more RGB light strips with only one power in parallel
Please be kindly informed that the total wattage of LED strip lights should not exceed the max wattage of this adaptor.
N*24W Power adapter + remote controller + 4-pin rgb strip light splitter (easily get 1 on amazon) + N*5M RGB LED strip
We don't recommend you to connect strip to more than 5M in series (may not work well because of the voltage drop).
It comes with self-adhesive backing for quick and easy installation.
Peel off the backing, press onto most clean and flat finish surfaces.
The cut points can be found every 3 LEDs, usually with solder pads.
You can simply cut to the desired length using a pair of scissors along the cut point line.
You can join/connect pieces of cut LED strip together using the solderless strip-to-strip connector
1. Open the plastic housing up;
2. Slide both sides of the LED tape into the connector;
3. Clip-on the connector into place until you hear a snap.
Tips: please choose the right connector for your strip
Width: 10mm for 5050 tape, 8mm for 3528 tape;
Pin: 2-pin for single colour strip, 4-pin for RGB strip
You can join/connect the cut-off LED strip to the controller box or power adapter with the included DC cable connecter.
|SKU||4100054-US||LED Type||5050 SMD LED|
|LED Quantity (Units/M)||30||Brightness (lm/m)||360|
|Frequency (hz)||50/60||Rated lifetime (h)||50,000|
|Switching Cycles||25000||Warranty||1 Year|
|Wattage(W)||24||Lamp current (mA)||2000|
|Package Quantity||Pack of 1 Unit||Input Voltage (v)||100-240 AC|
|Certification||CE, RoHS||Light Color||Multi-colored|
|Width (in)||0.39||Length (in)||196.85|