Lepro Flexible LED Light Strip (16.4ft, Daylight White, Cuttable)

Beautiful bright lights, definitely exactly what I was looking for. I used them for behind my arched mirror.

I'm going to start off on a positive note and say that the lights themselves work excellently and the brightness is very adjustable and the length of the wire is more than adequate for my application. Now comes the issues that I found that you may need to be aware of if you are going to seriously consider this for most applications that would apply to this. The first major issue I came across was when I was peeling the backing of the LEDs themselves in order to begin using the adhesive to stick to my application. It seemed that the backing took a lot of the adhesive from certain parts of the LED strip with it making the strip itself unable to stick to the surface of glass that I needed it to. Luckily the kit did come with some plastic tabs that had their own adhesive but that adhesive on those tabs was fairly weak and in my application I had to cut them in half in order for them to fit at various points as seen in a few of my pictures. It solved the issue but now that I have tabs and random locations it is a bit unsightly. As for the dimmer switch, normally it dangling would not be an issue if it weren't for the poor adhesive strength of whatever managed to stay on the LED strip and that of the tabs themselves, so I had to use velcro that I had on hand to anchor it so that the weight of the dimmer switch did not peel back the LED strip over time. It's unfortunate that out of the box I had to do so much just to make it work I am considering purchasing another strip that has Superior adhesive quality just so that my application remains seamless. But for now this will have to do, as you can see in one of my pictures the light is more than adequate at its brightest setting and can be dimmed further from that for comfort and can be also turned off from the dimmer switch entirely. I would have highly recommended it if it weren't for the problems with the adhesive, frankly I feel like I am being very generous with my three-star rating. I hope this information is helpful when considering purchasing this product over others.

Bought this as a Lightning Deal for $12. I'd seen these for a while but finally decided this was a good option to try. It arrived very quickly. Usually these gadgets get tossed aside and forgotten, but I decided to try it out. I plugged the power adapter into a switched wall outlet, ran the cord up the wall, and used that as my starting point for sticking up the strip.I wanted to go without the dimmer but I found I needed it in order to reach even my relatively-low ceiling. Even then I had to have a couple inches of the lighted portion hanging down. That would probably be the one complaint I have about this product. I used a cable clamp to provide some strain relief in the hope that it will prevent the strip from being pulled down by the cord tension.I used the full length, uncut. Be careful pulling the paper backing away from the strip; if you peel it incorrectly it will take the adhesive tape with it, then it won;t stick well at all. I recognized this and was able to correct it before getting far. I peeled away a section at a time, about 1~2 ft, working across the wall. It's sticky enough that I didn't need to clean (i.e., alcohol-prep) the surface, but it wouldn't be a bad idea to brush away cobwebs or dust. Once it's up,m it seems quite strongly attached. I've only had it up for an hour or so, so time will tell.I wish now I'd gotten a longer one so I could have gone all the way across the room, but this strip covers the majority of it. I'm quite impressed with the brightness overall; it seems to light up the room better than the two wall sconces. I have them actually facing down, so it doesn't project across the room as much as it could. The photos make it seem brighter and warmer than it actually is, but to my eye I can tell a nice difference. It won't completely light up a room on its own, but it does at least provide substantial fill light.I only wish I'd paid more attention to the temperature color. It is 6500K which comes out slightly bluish, and maybe not as bright as if it had been about 4000K-5000K. But ya get what ya get.Definitely getting more of these for some other rooms. But it's limited in that it needs to be near an outlet. I would love to hardwire it to a 120V light switch but that's obviously not feasible.UPDATE 11-Jul: I've had these up for over a week and I still like them. They maybe don't seem as bright as my initial impression, but still a nice fill light. What I do like most is that they are still holding strongly to my ceiling, even in hot & humid conditions. These have genuine 3M VHB thick-film adhesive. I'd bought a couple other strip rolls from other sellers, thinking they would be the same, but they use "ME" adhesive (with a logo meant to look like the "3M" logo) which is thinner and not nearly as sticky. So I'm buying at least another roll or two of the LE product, for when I want to stick the strip facing down or vertically. Be sure on these LE strip to only peel off the paper backing, NOT the adhesive tape itself.I also have been doing more research on the connection methods for joining multiple strips, splicing, tee-joints and corner joints, all without soldering (because I can't solder to save my life). So when I get more of the LE rolls I'm planning on extending this light almost all the way around my den. I also learned a bit about LED drivers which can be hard-wired to 120 VAC and provide a 12V DC current in different wattages. I'm thinking I may take down one one of the wall sconces, hardwire a driver, tuck it behind a wall, run the output wire up to the ceiling, and thus have a cleaner installation, dimmable lighting, and sufficient wattage for the extended length.UPDATE: I decided to downgrade 1 star as I find this strip has a flimsy backing, which makes it more difficult to work with when connecting strips together with the various push-and-snap connectors. (I find the other brand to be more rigid and easier to push in.)

This package deal is completely worth the price! You get the LED lights, power supply, an extra power connector, a couple of strip-to-strip connectors, and the remote control cord and remote. All work perfectly so far, and I am quite happy with the functions of the remote.I purchased an LE brand warm tungsten LED strip to use in a craft project, and used the power supply and remote from this package to light them up. I decided to go with tungsten, instead of the daylight LEDs included in this package, just because it suited my project better. The daylight LEDs in this pack look great, and are quite bright...so no problem with them.The adhesive on the back of the light strip seems to be perfect. I have had other strips fall off, because the adhesive isn't the best, but so far so good with these!The remote has several buttons that serve different functions: It has 100%, 50% and 25% brightness buttons, which quickly sets the brightness of the connected LEDs to that percentage. It has Brightness + and - buttons that increase or decrease the brightness of the LEDs in small increments.It has a Mode + and - button that allows you to select different flashing patterns of the lights. It has several patterns to choose from, and there are Speed + and - buttons that increase or decrease the duration of the patterns. I have not used these Modes much, but from what I've tested, it has a normal strobe mode, a 3-flash then pause mode, what seems to be a simulated "lightning" mode, and more. I may utilize this more when I make a new Halloween display I am thinking about!This set was my first time at working with LED strip lights in a craft project. I was completely uneducated with how to wire different lengths of cut LED strips, but after purchasing this and some other connector options, I am excited to do more with them! For my first project, I created a shadow box replica of an old Drive-In Movie Theater that I went to as a kid. I wanted to light the sunset behind the theater screen and tree cutouts, and light the inside of the screen to illuminate the interchangeable movie scenes I printed out. The picture is not great, but you can see how it turned out. (It looks better in person...). I used a strip of 6 LEDs to illuminate the sky, and a strip of 3 LEDs to illuminate inside the movie screen. I connected the two using the ZITRADES 8mm 2Pin 10Pcs LED Strip Connectors I bought off Amazon, and splicing the wires together using electrical tape. I then used the included power supply connector and adapter with the remote control to give it power.So far, so good! I would recommend this LE light kit, and LE lights in general. I have purchased this, warm white, and blue LEDs from them, and they all look and work great!

불빛이 밝아서 좋아요

So easy, put it up in less then 10 min. Make sure to clean surface and let dry first.

Perfecto lo recomiendo

Great for quick and easy installation.

I used this for my bedroom. Quick and easy to install. Very bright at maximum brightness. The adjustment dial works well. My only complaint is there is no push button on\off and you need to turn down the dial for off (it clicks at the bottom). I added an on\off switch extender so I don't need to adjust the brightness each time.

'A very good application for a standard home closet: We have closets in all bedrooms, the front room, and a TV room, but only one was wired with an overhead light. To anyone who wants to solve the problem of a dark closet (and who can take on the DIY of wiring an outlet inside that space), these strip lights are the "ticket". You can string these inside the entire space--ceiling, back walls, everywhere you need to see storage--and you can dispense with the dimmer and just plug the set into an outlet for on/off use. The company goes to a lot of trouble in supply small adhesive "bases," with directions, but really, it's easier to use short pieces of clear shipping tape on even moderately textured walls.

Have a "black hole" problem ? Kitchen counters underneath cabinets or closets without any lights ? A drop cord and these lights will make you happy : ) And in the case of those closets , your sanity. Instead of screaming you'll be smiling. Also I had a problem with my light set about 2 months after purchase ( so , no returning them ) and when I contacted the seller through Amazon's site they responded immediately with a full replacement set after verifying purchase. Very outstanding customer service. Two thumbs up ... : ) Great business to buy from !

i purchased two sets of the exact same lights and when they were installed one set is not as bright as the other. the dimmer control on both sets is on full brightness as well. so im not sure what the problem is but it looks odd that one set is dimmer then the other.

The first one I received did not light. I returned them and the replacement works great! We really love these lights in our mini-camper. They are dimmable and can be very bright. We are very pleased! This was long enough to fit around all the tops of the walls of our mini-camper.

Are you later and they still work great! I love how you can dim them

The media could not be loaded.

Good illumination. Strong white light. The dimmer is a little delayed when turning it on and doesn’t trigger the LED’s until you rotate about 1/4 turn after the ON click. Aside from that it’s a solid purchase.I will say that if you plan on extending the LED strip any distance greater than 1ft away from the dimmer, you’ll need to use a DC 12v male to female extension cable.

They install was super easy. I use it along the baseboard in the hallway as light for my MIL to help her get to the bathroom at night. She uses a walker and has dementia so she doesn't always remember to turn the lights on or off. I had night lights plugged in, but there was a section in between that waa dark. This was the perfect solution. I wasn't going to use the dimmer (you don't have to), but in the hallway, it was way to bright. So I plugged in the dimmer and it's perfect! Now she can see and I don't have to worry.

Bought these for a cabinet I was building for my laser engraver. I was specifically looking for one with a remote on it. The dimmer wheel is smooth. Lights are bright on the bright setting and have every option between full brightness and off so whatever level of light you want, these can do it. I bought the wrong connectors (My fault) so I had to run and get some 2 pin (not 4 pin) connectors so I could cut the wire to go around a corner. Once the right connectors were found, cutting the light and reattaching to the connector was a breeze!And the sticky on the back of the lights is real strong. Easy to stick to whatever surface you want!

I connected this to a Sonoff switch, which if operated via my Alexa.

Sonoff Wifi Switch Wireless Remote Control Electrical for Household Appliances, Compatible with Alexa DIY Your Home Via iPhone Android App (Sonoff Dlu)

The light is very bright. I installed it in my kitchen as under counter light - it is very good. The Sonoff is a binary - it is either on or off, there are other switches available to give you brightness control - and you don't have to use any wifi connector! You can simply plug it in, and unplug when done.This is excellent under counter lighting, and I will also be using it to light some of the closets around the house, and some of my garage shelving.The white is much brighter than the white option on a color roll.The light as a sticky back to it which will stick to almost anything. Making installation a breeze.For the price, this is amazing, and so many options. Using an Arduino I am making one for the bathroom that will come on when it senses movement, then switch off after 10 minutes. The lights will go under the vanity, and will light the bathroom enough for a 3 AM visit, without leaving you blinded by the lights!You can cut the tape at any point. You can then use jumpers to place the next run around a corner or over a gap. With basic skills, you can extend those wires as long as you want them. You can also start another run with a 12v adaptor. Again, some basic electrical skills needed for that.

Very happy with the product. They are easy to use and can be cut and soldered every 3 leds allowing you to get exactly the length you need in all sorts of places.

These are very bright and fit my needs perfectly. I would definitely order again in the future.

The lights are nice and bright and perfect for lighting the vanity mirror. If I ever need more LED strips in the future, I'll be back for more of these.

For the price you can't beat but just keep in mind they may not be as bright as you might think.

Love these strip lights, they are quite easy to install, the adhesive sticks really well to glass. I recommend this product!